C-Sport P8 stadium perimeter LED screens are widely used for digital perimeter advertising; Features: 1 Every cabinet is equipped with left & right fast locks, and an adjustable 90 degree rotating bracket for convenience of quick assembly of perimeter display; 2 Every screen comes with soft pillow protectors, soft LED module masks, so both athletes and LED screens can be fully protected; 3 The aluminum power box not only has light weight but also has excellent performance in heat dissipation; this effectively slows the aging process of power modules; 4 Every LED module supports front-and-rear service, this makes the operation easy during installation and later maintenance; 5 The front and back of the cabinet is dustproof and waterproof, and reaches IP65 protection level; 6 Compared with conventional LED display screens, Chipshow C-Sport series is energy-saving – about 1/3 energy consumption can be saved; this greatly reduces the operating cost;   7 The screen also comes with professional perimeter advertising software that supports diverse video input sources, such as DP, HDMI, VGA, SDL, and DVD;

P0.95,P1.26,P1.58,P1.9 C-Pad-U is quick & easy wall mounting solutions, designed in a perfect 16:9 ratio to get HD 2K 4K LED video wall and camera friendly display. Features: • Golden ratio 16:9, cabinet size 608*342mm, 4 cabinets form a 55 inch LED display. • Magnetically modules and fully front serviceable design, easy installation and maintenance. • Lightweight tiles design allows it to be easily packed and stacked. • Internal cabling is all quick release allowing for tool less service. • 3840Hz refresh rate which eliminates scan lines and flicker in your display on camera. • 160° horizontal and vertical viewing angle and increased grayscale capabilities. Application: Widely used in auditorium, conference room, banquet hall, secturity monitoring, command system, etc.

1. High precision cast aluminum cabinet, ultra-thin and light weight, 500 * 500 ≤ 7.5KG/cabinet, with a thickness of only 90mm; 2. 500X500/500X1000mm cabinets can be mixed and assembled to create a variety of shapes; 3.Both the 500x500mm and 500x1000mm cabinets use a minimalist mini control box of the same model and can be shared,Saving installation and calibrating time; 4. Optional curved lock, capable of splicing large screens with-10°~15 ° camber, 90°corner, etc; 5. The modular button lock design allows for fast assembly, disassembly and maintenance within 5 seconds; 6. Optional magnetic module can achieve complete assembly, disassembly and maintenance of the module and power supply front the front. 7. Work in silence: no fan, noise ≤ 40DB; Not affecting the on-site audio-visual effect; 8. Point by point calibration: White balance point by point calibration to ensure consistency and uniformity of the display; 9. Background large screen optimization plan; High refresh, SLR, camera 1/3000S shutter capture, no flicker, no ghost scanning line; 10.Indoor and outdoor universal pixel pitches with P1.9/2.6/2.9/3.9/4.8 ets;Specialized in providing overall LED display solutions for events sucas conferences，stage，product launches，and real estate。

1.The box body is made of aluminum alloy, which is light in weight, thin in thickness, and beautiful in appearance; 2.The module is completely front-maintained, has good flatness, and is easy to install and disassemble; 3.The box body adopts internal wiring, and the wiring is simple, which perfectly realizes the splicing of the box body; 4.The cabinet has good heat dissipation, no noise, energy saving and environmental protection; 5.The box body is installed on the wall, which is widely used in commercial display, indoor fixed advertising, auditorium, conference room, banquet, front hall, exhibition demonstration, transportation, studio, command and monitoring; 6.Suitable for P2.5, P2.6, P2.97, P3.91 equidistant 250*250mm modules; 7.The box is easy to cut and can be made into the size of 1000/750/500*250 mm;

1.COB integrated encapsulation transparent display panel + mobile phone 4G control system play card + GPS positioning + WIFI function, easy to operate and play； 2.Advertising brightness can be adjusted according to the intensity of the light, more energy-efficient, slower Leds attenuation, and longer life span; 3.The light transmittance at the hollow of the transparent display panel reaches 52%, and the addition of the reversing screen function does not affect the reversing vision of the driver; 4.The flame-retardant semi-PU composite fabric protects HUB boards, control cards, 4G cards, etc., plus a soft bag that has better bending ability during mounting; 5.Weight of the screen is less than 1.5kg, and it can be installed quickly and without damaging the glass or bracket. The screen body and the flexible deformation two-dimensional bending fit the mounting surface; 6.Can play graphic advertisements, subtitles, videos, lunar calendar, dial, timing, temperature, humidity, announcements, weather forecasts, etc.

Features: 1 Good flatness: the screen adopts die-casting aluminum cabinets with a tolerance within 0.1mm; 2 Ultra-thin: the die-casting aluminum cabinets are 20% thinner and 15kg/㎡ than iron cabinets, which helps reduce transportation and framework costs significantly; 3 Easy to upgrade and replace: the cabinets are adapted to our P2.5~P16 modules; so you do not have to change the cabinets for an upgrade, this will save a lot of manpower and cabinet costs; 4 Multiple purposes: As a large display solution, the C-Fit series is widely used as outdoor advertising screens, stage rental screens, and stadium perimeter LED display screens; the C-Fit series is not only used as permanently wall-mounted screens but also used as ground-stacked screens for small events or spaces with low ceilings; 5 High brightness: the brightness reaches 3700~4200CD/㎡, so the screen can still present clear pictures under strong light; 6 Slow temperature rise, efficient heat dissipation: the heat-dissipation device adopts aluminum magnesium alloy material with excellent heat conduction; 7 Highly cost-effective: an IP65-rated enclosure provides protection against all kinds of bad weather conditions, such as water jets, salt spray, salt corrosion, and wind erosion; 8 High reliability: all the modules adopt seal technique and high-quality copper wire;

Outdoor transparent LED display solution Features 1 Light-weight: the weight is only 14.2kg/㎡，the screen just weights 15.3kgs（cabinet thickness without power box: 47.5mm, cabinet thickness with power box: 97mm）, It is quite easy to install and maintain, and there is no requirement for structural strengthening; 2 High transparency: the transparency of the screen is more than 48%; when mounted on a glass wall, the screen turns into a lifelike video wall; and you can still get a clear outward view through the transparent LED screen; 3 Adaptable to all weather conditions: the screen has high resistance at low/high temperatures and high humidity; it can work normally under different outdoor environments; 4 High ventilation: the grid-shaped LED modules ensure that wind can directly pass through gaps between grids; this will save you a significant cost that should have been used in the enhancement of the steel structure; 5 Front-And-Rear maintenance: you can install and maintain the screen from its front and back, so it has a very loose requirement of on-site installation conditions; 6 Large cabinet size: the screen adopts large-sized cabinets (cabinet size: 1.2meter * 0.9meter) to reduce the workload of installation;

Portable traffic warning sign is for traffic accident scenes, security checkpoints, drunk driving inspections, and various emergencies. Features 1. Foldable, use linkage system, flexible retractable 2. With pneumatic lifting function 3. Eight-shaped base support frame, wind-resistant design, open with one click. 4. With wheels and handles, easy to carry 5. Equipped with warning lights and display 6. Built-in black box and high-definition camera (optional)

This screen is ventilated, lightweight, thin and front maintenance available, which is suitable for outdoor wall advertising solutions, especially for outdoor unipole advertising solutions. Features 1 This series is specially designed for two typical usage scenarios (1: coastal areas that have strong winds, 2: old buildings whose walls have special load-bearing requirements) 2 There are uniform ventilation holes in every module, significantly reducing windage; 3 The display screens are characterized by “Hollow Out” design and light-weight (cabinet weight (size: 960*960mm): 33KG, cabinet thickness (including modules): 127mm); 4 Based on signal box design and integrated power supply units, the screens’ inner structures are relatively simple, and the C-Vent series display screens just resort to air convection inside the screens to dissipate heat without using air conditioners; hence, more energy can be saved; 5 All the LED modules can be maintained from the front and back; the simple installation and maintenance provide a good user experience; 6 Modules are mounted vertically and the wideness of every module is only 240mm;

C-Vent, ventilating leads to high heat radiating, no need fan or air-conditioner, reducing 50% energy consumption. Advantages: 1. Ventilating: Air can transmit the display body directly, ventilation rate 50%. 2. No light penetration: Penetrating design without light penetration, no harm to contrast ratio, full conservated the display effect. 3. Front access: Front-maintenance module is convenient for disassembly and assembly. 4. Low windage resistance: Lower requirement of steel structure, 35% structure cost saved. 5. Air-conditioner exonerated: Ventilating leads to high radiating, no need fan or air-conditioner. 6. Energy-saving & environmental protection: Low power consumption, 50% energy saving. 7. High applicability: IP65 fully sealing design, rain proof, dust proof, adapted to all weather surroundings.

Features 1. The shell is made of cast aluminum and transparent board, and it is installed in an inverted style, which has good rainproof effect; 2. The exterior of the screen adopts a bright surface spraying process, which can be well matched with the car paint; 3. There is a hole at the bottom of the screen for installation with the roof bracket for easy installation; 4. Using DC to DC wide voltage 9 to 36 volt power supply, which can be used by almost all cars; 5. The screen body comes with a delayed start-up function, which does not affect the start of the car; 6. Accurate and efficient with Global GPS fixed-point placement; 7. Wireless control with mobile phone and pad, and the operation interface is simple and practical; 8. Real-time monitoring of the screen; 9. Full color cloud sending Android system architecture, Full Netcom 4G communication; 10. Ali Cloud in-vehicle TAXI_HUB dedicated platform service escorts you in-vehicle interconnection; 11. Standard WiFi module, support platform hotspot Internet access, car hotspot Internet access； 12. Support third-party APP, platform, microservice docking, safe, efficient and reliable； 13. Traffic trajectory, mileage, advertising log statistics, graphical and intuitive.

Outdoor transparent LED advertising solutions Advantages: 1. Lightweight: the weight is only 7.5kg/pcs, easy to install and maintain, without supporting structure reinforcement, and high efficiency. 2. High transparency: 58% transparency, turning the glass screen into a lifelike video wall, without affecting the outdoor vision. 3. All-weather: resistant to various working conditions such as low temperature, high temperature, humidity, etc.. 4. Low power consumption: using positive-emitting high-brightness LED lights, high conversion efficiency PFC function power supply, large screen energy saving more than 50%. 5. Front and rear maintenance: greatly improving the adaptability of the product to on-site installation conditions. 6. No steel structure: directly use the original glass curtain wall steel structure, which can reduce the weight of the steel structure by about 50kg per square meter. Application: Mainly used in shopping malls, terminal, car building, exhibition hall, office building glass curtain wall and other occasions with high lighting requirements.